WR703N – Wireless Serial Port

The following guide is what I’ve used (twice) to turn a WR703N into a wireless serial port for configuring Cisco network switches/routers. I have already installed OpenWRT onto it before this guide starts. Tap the reset button on the side while inserting the power cable and the status light should flash blue fast. Set you PC’s IP address to 192.168.1.* (last octet cant be 1). Telnet to address 192.168.1.1 and type the following: Setup LAN Networking uci set network.lan.ipaddr=<Ip Address> uci set network.lan.gateway=<default gateway> uci set network.lan.dns=<DNS-Server address> ¬†uci commit /etc/init.d/network restart Install Minicom and USB serial driver opkg update Continue Reading →